jks

Alright. After a barrage of emails I've implemented a new checkbox on the admin config tab that says "Show user names to user connections" The default is checked (i.e. yes, show the user names). It will be available in the next release.

No matter the setting the user names will continue to be shown on the admin users tab, admin log tab etc. This setting compliments the existing checkboxes controlling whether geolocation information is shown and if the geolocated city is shown.

And this is all independent of whether a user name is demanded at all as set by the checkbox on the admin control tab.

There is currently a bug where certain non-ASCII, non-UTF8 user names formed by using the Kiwi API directly causes the admin users tab to disappear even though it should have valid entries. Fix coming in the next release.

Well, that's why I said "probably".

The day any of this nonsense starts to impact me is the day I shut everything down.

Believe it or not, this was probably a power supply problem. We've seen over the years that writing SD cards requires a substantial amount of extra peak current. So a power supply that operates a Beagle + Kiwi board normally may not also be able to power an SD write operation on top of that.

This explains why running a Beagle + SD write alone (without the Kiwi board) worked. The current saved from not having the Kiwi board was enough to handle the SD write peak currents.

I have updated the operating guide instructions to mention this issue.

Where's Rodney Dangerfield when we really need him?

From the CHANGE_LOG file: