ve6jy
About
- Username
- ve6jy
- Joined
- Visits
- 246
- Last Active
- Roles
- Member
- Points
- 1
Comments
-
Today (April 19) there have been dozens of solar bursts covering about 6 to 30 megs visible on my KIWI... here's one: https://forum.kiwisdr.com/uploads/715/YQZ5S1OR3D3Y.jpg
-
That is ctl on my font, and it was copied/pasted from the guy who tried it on his system and it worked. But not here. https://forum.kiwisdr.com/uploads/379/MRX093HOB33Z.jpg
-
Well as usual nothing works for me. A friend checked on his KIWI and the command works fine. I even copied and pasted so to remove those errors. It doesn't work on another of my KIWIs either. I am on Debian 8.5. https://forum.kiwisdr.com/uploads/…
-
I am certainly interested, thanks
-
Ah ha, that explains it. Not a problem now that we know what is going on! Overall, it works very well and sure is handy for some of our MARS/CFARS exercises. I even use it with the volume for voice scanning too. Thanks for all the effort you have…
-
The solar noise isn't present during night time when the charge circuit isn't allowed to be active. The IP 8.208.21.34 has been showing up quite often, the location(s) can be from anywhere in the world but the IP stays the same. They camp on 23 in …
-
I certainly can see that trying to cover every combination is a complex one for sure. I think that solution will do the job fine, many thanks.
-
using 1.598 on the 8 ch config, RX 0 and 1 still seem to be used up by the preemptible digital modes... https://forum.kiwisdr.com/uploads/612/DR6JZF5VK0TI.jpg
-
Seems like the update (many thanks for the quick update) did the job, all preempted channels returned fine. The only issue I see is that in my 8 channel configuration, some of the waterfall channels get used up so a new user gets the open channel b…
-
The preemption modes are great, I've wished for that feature for some time. I see some of my KIWI's have varying autorun uptimes, showing preemptions and subsequent reconnections. Yet others only have a few running and several that didn't reconnect.…
-
Latest update... the provider ran a ping test all weekend and things were fine (as expected), but the regular internet was always ok, just not the KIWI's. So I changed routers to an IQRouter. No difference. I went back to the Asus. Mor troublesh…
-
Thanks for the comments. It happens when only 1 user is on... from anywhere, even if that user is me (on the external IP). Can barely get thru 2 minutes of audio/waterfall, sometimes less. Just now, got 26 seconds and then freeze on http://72.172.…
-
Well I spoke too soon.... jinxed it! Issue returned this afternoon - likely right around the time DL7AWL checked! nothing I did (that I know of). I've been using that URL for over a year or so, but I will correct it. Altho it has worked fine with …
-
several days later and all is behaving fine....
-
I got the switch from a friend who set it up (at my request) as a dumb switch as I would be too dumb to mess with it. Yes there is quite a bit running, but it has been that way for a long time and the internet is very reliable so it does very well. …
-
SRW2024 v1.3
-
I have other computers that serve multiple SDRAnywhere, Perseus and various video camera servers, all wired to a 24 port Cisco dumb switch, which go to the Asus RT-AC68u router. I have changed ports on that, in trying to eliminate commonality somewh…
-
Yes, the first thing to check is the last thing one touched.... but in this case I can't think of anything I did. I'm leaning to suspect the ISP did something but I'd like to be able to give them an area to look into first. I was planning to give …
-
That sounds exactly like what has been happening for the last week or so.... Yes I have relay protection for when I transmit. All are wired direct with ethernet. All 4 kiwi's behave the same, yet the internet for everything else is just fine. …
-
I was just experimenting, in admin page, extensions I selected wspr 60m EU for autorun 3 then looked at the status page - it started out on the right freq but when I looked again in a few min it had cycled to 10m and 2 min later had gone to 160m. S…
-
I never ran it any other way than from the autorun/extension admin page. And the IWBP has been running for days without any perceived issues, it was only when I selected 60m Eu for the second slice (in the 4 rx mode as this KIWI isn't listed) that…
-
Only from the admin page, extensions tab.
-
I'm viewing my spots on http://wspr.rocks/topspotters/index.html and shows me with very inflated 160 and 60m totals. The IWBP scan had been going for days and always seemed to have a logical number of spots. Last evening I enabled a second slot on…
-
2 of my 4 are broken.... loads but no content. Not at home so will wait and trust they'll come back... http://ciw321.cfars.ca:8174 and 8175. update - came back on line overnight.
-
Trying out the 3.12 Windows(10) version.... it doesn't seem to find my local kiwi so typing in the ip/port everytime is a hassle. Same with other KIWI's, I was hoping it would store those for quicker access next time - maybe it does but I haven't fo…
-
I wish we could revisit the lock function... there is far too much area that one can click on (inadvertently) and knock oneself way off frequency. Asking for a klutzy friend....
-
I wish the shift-click could be made a toggle.... Just about every other SDR program I use lets you make that a permanent type choice. Having to use the other hand to hit the shift button is far from convenient.
-
Yes that would be a great way to incorporate the password feature. I've often wished it could be set up like that.
-
email has been forwarded...
-
I had a bunch on order since January, said they'd ship at end of April but kept being delayed, now just received word from Seeed that the product was unavailable (EOL) and that I should cancel my order and get a refund.