Yogicat

Comments

• Does it mean that I can happily stay on 1.690 for a while?

  in v1.694 [hopefully a working version of the failed v1.691,692 update] Comment by Yogicat July 19
• No wonder you don't want any pre-1.690 visible publicly.

  in UpDate to 1.690 Comment by Yogicat July 9
• How did you replace the logo? @nitroengine

  in v1.683 Comment by Yogicat May 31
• I hope that the licence for the logo did not cost you much, because that was one of the superficial things that Kiwi needs to improve on. I prefer a modern and clean logo design.

  in v1.683 Comment by Yogicat May 30
• Have a toothpick ready. Power up while holding down the boot button. I had to do this when I did the debian 8to11 upgrade.

  in Debian 11 upgrade for Kiwis using BeagleBone Green/Black Comment by Yogicat May 21
• I think the mouse wheel should only be for zooming in and out of the waterfall, and using it for tuning is rather unnecessary. In my use case, I just develop the habit of accurate button mushing / holding.

  in Mouse wheel to tune the frequency? [added in v1.694] Comment by Yogicat May 18
• Now I can retire my button mashing skills with this new click-hold feature.

  in v1.677 Comment by Yogicat May 5
• It is sold out right at the moment when I am ready to make an order. I hope that the next batch will be available soon.

  in KiwiSDR 2: kiwisdr.nz sold out -- please order via hamradio.co.uk and wimo.com Comment by Yogicat April 19
• I would never give up on such a wonderful piece of equipment. Like what jks just said, re-flash the Kiwi1 with Debian 11.9, use the hold-down-the-boot-button-before-power-up trick.

  in KiwiSDR not starting Comment by Yogicat April 15
• If KCBS were to broadcast silence in DRM, the last MSC box would have turned green, but it remained red throughout in this video. Therefore, the decode wasn't successful at all. Could this mean that they wasted electricity on something no one could …

  in Pyongyang KCBS DRM cannot be decoded ... (3205/6140 kHz) Comment by Yogicat March 31
• Is it okay if I create the SD card by downloading the .img.xz and write onto an sd card with dd (after decompressing it into .img of course)? I am running AntiX 23 (a Debian-based distro) here.

  in Debian 11 upgrade for Kiwis using BeagleBone Green/Black Comment by Yogicat February 20
• John, would you recommend overwriting the original supplied SD card with this new (Debian 10) image?

  in MY Kiwi got a big problem . Comment by Yogicat April 2023
• There is the "DX EiBi database" feature built-in. Right-click at the frequency bar and you'll see it.

  in Schedules Extension? Comment by Yogicat November 2022
• Use alt+right arrow if it is easier. Create DX labels for the CB channels you would like to tune to. This is the one-click solution you can have.

  in 10Khz tuning steps Comment by Yogicat November 2022
• Text box is working. Thank you.

  in [v1.565] Text box is blank during the backup to micro SD card process [fixed in v1.566] Comment by Yogicat October 2022
• http://kiwisdr.com/quickstart/#id-user-tune Maybe you would find this useful. The Users tab shows other listeners by this format already.

  in Tuning by clicking an HTML link ? Comment by Yogicat September 2022
• Is the serial number chronological? Can I tell its date of manufacture from the serial number?

  in SERIAL NUMBER Comment by Yogicat September 2022
• >Any way to get completely rid of the waterfall? Use the /?no_wf URL suffix. The FFT would be displayed instead.

  in How Do I Switch to a Spectrum Display? Comment by Yogicat July 2022
• The HFDL decoder in 1.546 no longer has the stations and the bands drop-down menus. They were present in 1.544. I am missing those. Rather than starting a new topic, maybe I could just say it here.

  in All Kiwis are stuttering - since today [fixed in v1.546] Comment by Yogicat July 2022