The KiwiSDR 2 online store is open for orders! Please visit kiwisdr.nz
Please visit kiwisdr.com (documentation) and kiwisdr.nz (online store)
Blocking the local connection to the Kiwi
Good morning,
I have a question to ask.
From this morning the connection to my Kiwi freezes after a few minutes, and by connection I don't mean the public one [which I think also blocks], but the local one 192.168.xxx.xxx. both in the SDR part and in the admin part. In order to restore the connection, I have to turn the power off and on again or remove and replace the Lan cable. I noticed that during the problem highlighted, the two lights on the ethernet cable both remain on as well as all 4 blue LEDs.
Anyone know what this problem is caused by?
I would not want it to be due to the problem I presented to users in this post of mine today
Fabrys
Comments
Possibly related to this: http://forum.kiwisdr.com/index.php?p=/discussion/2438/kiwisdrs-being-restarted-attack-or-poorly-programmed-bot#latest
.... yes you are right, I did not notice when I posted this post because I had not opened the ADMIN / LOG page, then when I made my post on your post I found that the problem was due to L ### SECURITY: NO AUTH YET: W / F 4 35.184.226.77 etc.
Now if anyone were kind enough to provide me with the exact CIDR procedure to block all IP 34 and 35 they could try to bypass the problem before any system patches.
I am going to try in my total ignorance of the system to blacklist these two strings:
34.0.0.0/8 and 35.0.0.0/8
but I would like some confirmation before making a mess
Fabrys