jks

From the CHANGE_LOG file:

v1.388  April 11, 2020
    Desktop UI improvements:
        Added "tuning lock" to right-click popup menu. When active a single-click in waterfall
        or DX label area will briefly show a "tuning locked" overlay. Should perhaps be extended
        to include clicks in tuning scale. Does not effect other methods of tuning, e.g. entry in
        frequency box, click on +/- step buttons.

    Mobile UI improvements:
        Double-tap/touch brings up popup menu (same menu as right-click on desktop).
        Has tuning lock function same as desktop.
        Two finger pinch-in/out gesture will zoom the waterfall in/out. Tested on iOS & Android.

Fixed in v1.388

From the CHANGE_LOG file:

v1.387  April 10, 2020
    Admin page control tab:
        By special request, added ability to limit number of simultaneous non-Kiwi API connections
            (e.g. kiwirecorder). This works in the same way (and overrides) the TDoA extension
            setting that limits the number of simultaneous TDoA connections.
    DX label edit:
        Passband frequencies can be entered using "k" and "M" suffixes for kHz and MHz.
        I.e. "2100" and "2.1k" are equivalent, as are "1200000", "1200k" and "1.2M".
        However subsequent display of the passband field is always in Hz.
        So after entering "-2.1k, 1.2M" on the next edit the field will display "-2100, 1200000" (Hz).

From the CHANGE_LOG file:

v1.387  April 10, 2020
    Admin page control tab:
        By special request, added ability to limit number of simultaneous non-Kiwi API connections
            (e.g. kiwirecorder). This works in the same way (and overrides) the TDoA extension
            setting that limits the number of simultaneous TDoA connections.
    DX label edit:
        Passband frequencies can be entered using "k" and "M" suffixes for kHz and MHz.
        I.e. "2100" and "2.1k" are equivalent, as are "1200000", "1200k" and "1.2M".
        However subsequent display of the passband field is always in Hz.
        So after entering "-2.1k, 1.2M" on the next edit the field will display "-2100, 1200000" (Hz).

From the CHANGE_LOG file:

v1.387  April 10, 2020
    Admin page control tab:
        By special request, added ability to limit number of simultaneous non-Kiwi API connections
            (e.g. kiwirecorder). This works in the same way (and overrides) the TDoA extension
            setting that limits the number of simultaneous TDoA connections.
    DX label edit:
        Passband frequencies can be entered using "k" and "M" suffixes for kHz and MHz.
        I.e. "2100" and "2.1k" are equivalent, as are "1200000", "1200k" and "1.2M".
        However subsequent display of the passband field is always in Hz.
        So after entering "-2.1k, 1.2M" on the next edit the field will display "-2100, 1200000" (Hz).