Always same area in Mexico

LonecrowLonecrow
in TDoA topics
I try to locate signals and it always throws them into one specific location (image included). I try to broaden my scope and I try to pick about 5-6 people in a circle around me going further and further out. But for the majority of signals I get this



Any ideas?

Comments

  • jksjks
    Are you trying to DF NLM4? If so, make sure your IQ passband is cranked down to 200 Hz or a bit less so other signals are not taken into account. Use the 'p' and 'P' keys to adjust the passband width.
  • G8JNJG8JNJ
    It takes a bit of practice and a basic understanding of propagation on different frequencies before you start getting good TDoA results.

    Try some of the lower frequency known signals first to gain some experience.

    Nils posting is a good read too

    https://dk8ok.org/2018/07/25/direction-finding-first-experiences/

    Regards,

    Martin - G8JNJ
  • LonecrowLonecrow
    Thanks no I didn't use that. It seems to show up all the time. I did turn down the bandpass and really expanded my range to try this time. I'm trying to locate the origin of t hat signal on the other thread.
  • LonecrowLonecrow
    narrowing bandpass did help at least I'm getting different results. I'm wondering if the mexico coord is basically the default for "I dont know".

    Trying to narrow down that one signal. Now its near Hawaii
Sign In or Register to comment.