sv1btl
About
- Username
- sv1btl
- Joined
- Visits
- 372
- Last Active
- Roles
- Member
- Points
- 5
Comments
-
These are frequencies that unlicensed operators use for their local contacts, using conventional tranceivers. You will find them on:- 6630 to 6725 LSB- 3435 to 3485 LSB- 1610 to 1750 AM. This is a band that many greek radio-operators use to test the…
-
No answer to this topic until now... Maybe is rather difficult for this kind of a project, I guess.
-
@Daniel, if there is a slight activity (e.g 1KHz qsy), the "counter" is starting again to count the time limit. That's why the timeout does not function as expected.
-
@linkfanelYou can use "Inactivity timeout" set to 10-15' - the best way for listeners to limit down their occupation. @G8JNJ What does this mean "best receivers"? Most listeners define their needs according to their interests. So…
-
Hi.Well, I am not very sure what is this all about "sort" and "rate" the receivers, and I am not very sure that I've understood what do the icons indicate for some (not all) receivers, but according to my opinion the best criteri…
-
The next step will be maybe to increase listeners' slots!...
-
It's working just GREAT!!!
-
It's OK now! Thank you!.
-
Yes, I can see it now.at http://rx.linkfanel.net. Will it be publish at sdr.hu, or shall we now use the new address?
-
Thanks. The server is still public activated with the address : http://sv1btl.no-ip.org:8073, but this activity does not appear on sdr.hu.
-
THX a lot!. I'll keep you informed.
-
What I Have to do? Shall I communicate with them and ask for a replacement?Are you going to inform them about the problem?
-
1.42 V on GSGN and 0.85 V on GMAG
-
Paid withPayPal balanceon 2 March 2017 Ship toEmmanuel PAthens115 23Greece Transaction ID06L823047D328081X Seller infoWiMo Antennen und Elektronik GmbH+49 727696680http://www.wimo.compaypal@wimo.com Purchase details
-
Check points voltage:* 5V IN = 4.78 V. * 5VE = 4.59 V. * 5V = 4.63 V. * 3.3V = 3.44 V. * 1V = 0.99 V. * 1.8V = 1.8 V. * 3.3A = 3.29 V. * 3.3G - 3.31 V. * 3.3V GPS = 3.26 V.
-
I don't have an oscilloscope.The voltage measurement on GCLK is 0.91V
-
This is the last screen, after a restart. "Search" last few seconds and then stoped again..
-
Check for the voltages is OK. All of them.Maybe I have to live without GPS....
-
GPS output gives 3.6 V and the same currency is at the other end of the coaxial, just before the antenna. So, there are not any coaxial problems.
-
I;ve already placed a new antenna, with the same results.I've bought kiwi on February.
-
Everything was just fine before 2-3 days. I thought that GPS came with the KIWI was damaged, I have placed a new one, but with the same results.
-
Please have a look..
-
No-IP is free for limited accounts and this will be a better idea, instead of dyn.dns
-
Why don't you try Static IP on Kiwi and to setup the exclusion for the 8073 port on router for given internal IP?
-
Works! Thank you!
-
Maybe you have to post an announcement about this, for Chrome users.Thank you very much fo the efforts!
-
No need! I've just received an update to Chrome (new version 58.0.3029.81 (64-bit) and the problem is solved. Thank you!
-
I've now cleaned cache. The same problem in Chrome.I've tried to access admin's page from Firefox - success (!!!!)Trying via Microsoft Edge - success (!!!)This is the first time that Chrome doed not open admin's page.
-
No, I'm saying that there is not any screen available - blank screen. Local or via another ip is the same.
-
Yes, I do know this. But it has also some rather good software noise blanker and noise reduction options, which are useful too.