W1EUJ

About

Username
W1EUJ
Joined
Visits
821
Last Active
Roles
Member
Points
14

Reactions

4Helpful2Awesome

Comments

  • Level 0
    in RFI from 3-8 MHz Comment by W1EUJ January 2018
  • Added SLP-30-4 filter, signal gone plus some other background junk. Thanks folks!
    in Hearing 6M Beacon at 16.6032 Comment by W1EUJ January 2018
  • The beacon is 30db above S9. Wow! I've purchased a low-pass with a more appropriate cutoff.
    in Hearing 6M Beacon at 16.6032 Comment by W1EUJ January 2018
  • The beacon is on a hill, about 10-15W into a 3 element beam vertical polarization, oriented such that I'm broadside. Looks like about three and a half miles away. The LPF was from the previous SDR, selected to attenuate the FM BCB but leave HF with…
    in Hearing 6M Beacon at 16.6032 Comment by W1EUJ December 2017
  • Those wide bands at 15 and 17 MHz that seem to shift up and down to the same two or three positions are interesting. Corresponding to the lights being turned on and a room warming up? I look forward to seeing these things on our own installation rat…
    in Automated Screenshots Comment by W1EUJ November 2017
  • Click on the text 'Spectrogram from VE3SUN' above. Or here: https://www.youtube.com/watch?v=_dQsr4ayxbU
    in Automated Screenshots Comment by W1EUJ November 2017
  • Video is with 10 second snapshot every 3 minutes. Having had the experience of using ffmpeg to turn this series into a video, it was convenient that all the filenames were the same but for a (n) enumeration. While it would be useful for each filena…
    in Automated Screenshots Comment by W1EUJ November 2017
  • Video from series I took from your kiwi. Spectogram from VE3SUN
    in Automated Screenshots Comment by W1EUJ November 2017
  • A couple things. One is that on Firefox, the spacing of the checkboxes is a bit off. Second is that the saved file name could use a timestamp added to it. I'm going to leave this running for a while.
    in Automated Screenshots Comment by W1EUJ November 2017
  • Oh wow, can't wait to try it out!
    in Automated Screenshots Comment by W1EUJ November 2017
  • I'll be glad with what I can get. Thanks for thinking on it.
    in Automated Screenshots Comment by W1EUJ November 2017
  • I see the autosave feature, I get it now. I see that when you record the cycle that you get four images, one for each band. I tried running the extension to snapshot the entire 0-30 MHz; I zoomed all the way out, set it to Cycle and Autosave and wai…
    in Automated Screenshots Comment by W1EUJ November 2017
  • Wow - that's neat! I had no idea about this feature. I have to poke around to see what it did. It should have generated those JPGs, once per change in beacon, and saved them on the Beagle, right? What I was looking for was a series of periodic snaps…
    in Automated Screenshots Comment by W1EUJ November 2017