KU4BY
About
- Username
- KU4BY
- Joined
- Visits
- 259
- Last Active
- Roles
- Member
- Points
- 1
Comments
-
OK, so I might have figured it out. Here is a list of all of the kiwirecorder.py connections from user.log last night up until about 15 minutes ago. They do appear to have started showing up last night after updating to 1.499. They've probably alway…
-
Is there a way to pull a list of all of the connections I received over night? I do have SSH setup on the kiwi if necessary. Thanks!
-
I'm not sure if this is related or not but after I ran the update earlier, I've had a ton of "kiwirecorder.py" bots show up. They come in close to each other, stay for just over a minute, then leave together. I've not noticed this many bef…
-
@jks removed the block. Re-enabled allowing more than one connection per IP address, and kicked off the update.
-
@Powernumpty Makes sense, but I honestly don't even go in there unless I'm having an issue or checking for updates. I rarely have the Admin tab open long enough for it to time out which is why it's never been an issue. I'll just remember to refresh …
-
Well it's been about 6 and a half hours since I re-added that IP to the blacklist and so far so good. As far as I can tell, the kiwi never rebooted after I hit the button but it did restart after I hit the restart server button so I'm not sure about…
-
I had that set in the past, not sure why it changed. Also, I noticed after the restart that my local blacklist was empty???
-
Rgr. I added the IP to the black list and then tried a Beagle Reboot but the reboot didn't work. Nothing happened. I then hit the restart server button and that restarted the server. Now I'm just waiting to see what happens next... 😂
-
The Admin Status Tab only shows my one active connection to the kiwi. No entries or Kick buttons on the other 3 receivers which is what began this confusion for me. https://forum.kiwisdr.com/uploads/993/ER9I3FS7ZCGS.jpg Thanks for the log info, I'm …
-
I X'd out my public IP but have no idea who the 182.150.24.15 (Appears to be Chinanet) is and why they're not showing up in the monitor. I'll wait for your response before I blacklist it to see if anything changes. Mon Mar 14 20:19:10 07:16:08.795 …
-
I just saw a few more connection attempts and they are all saying MON Allowed. The only thing I haven't tried on this end is to actually power down the kiwi and see if letting it sit for a few minutes helps is out. I'm just not sure if I'll be able …
-
https://forum.kiwisdr.com/index.php?p=/discussion/comment/13572#Comment_13572 Yeah I'm getting that now too but I've been able to get in all day until now.
-
It's always shown my public IP address. Something I just noticed in the log is that the SDR does think all channels are busy. I currently have one connection to it but here is the log entry. Mon Mar 14 20:04:01 07:01:00.084 0123 SNR_meas: al…
-
Nolocal made no difference and should be included in the following: Mon Mar 14 19:49:34 06:46:32.811 0123 [01] PWD isLocal_if_ip: flg=0x18 fam=2 socktype=1 proto=6 addrlen=16 192.168.0.43 Mon Mar 14 19:49:34 06:46:32.811 0123 [01] L PWD isLocal_i…
-
When connecting locally, the log shows my local IP, the 192.168.X.X address. When connecting via kiwisdr.ku4by.com, the log shows my public IP address. NSLookup only returns an IPV4 Address for my public address. One difference I am seeing is that w…
-
It reloads the page but doesn't drop me into a channel. If I connect to it in another tab using the public link, it updates to show that that particular channel is in use and 3 others are empty but still doesn't drop me in there. This is the same if…
-
Actually I haven't because that's not something I've ever had to do before. I can give it a try but at this point I'm certain that it's something with the jack itself. It could just be a bent pin but I'm not going to mess with it until I hear back a…
-
I've tried 3 different SD cards that have been validated on a pc and none of them are seen by the BBB. Last week everything was working fine so I burned that image (v 1.442) to an SD card and rebooted the BBB but it just booted up normally because i…
-
Mine updated to v1.444 the other day and when I tried to make a backup on a BBB, it kept failing with Error 1 using 3 known good SD cards. I'm gonna see if I can load my 1.442 image back on it tomorrow after I back up my labels. Could this have any…
-
Yeah I've had mixed results with those in the past. I haven't tried one in this case but if I can't figure anything else out I might give it a try. Thanks!
-
Yes Stu, there are solar chargers out there already that do what I am trying to do but I am being cheap about it as the sole purpose of my solar system at this point is to power my kiwisdr. I opted to go with my Raspberry Pi B model and an MCP3008 …
-
That's an interesting idea but I don't think it would be accurate enough for what I'm wanting to do and I'm also wanting to monitor multiple sensors. Plus the addition of even a small amount of RF near the Kiwi seems to dampen the receive. I had the…
-
Thanks Clint, That's similar to what I'm looking to do and being able to monitor the shed temp would be a bonus as well. I have an ethernet connection but I'm not really interested in setting up wifi although I could if it boils down to it and have …