HB9TMC

About

Username: HB9TMC
Joined: February 2019
Visits: 4,145
Last Active: 1:01PM
Roles: Member
Points: 12

Reactions

19Helpful8Awesome

Waterfall timestamp setting saved in cookies or browser storage

HB9TMC

February 2

It is also possible to enable them via url parameter
wfts=waterfall timestamp: in seconds (2 to 3600)
UI: Mouse scroll wheel

HB9TMC

January 12

v1.694 July 20, 2024
Mouse wheel tuning: (thanks PSO, G8JNJ, et al)
       The mouse wheel can now tune the frequency as well as adjusting the zoom.
  &
… (more)

v1.694 July 20, 2024
Mouse wheel tuning: (thanks PSO, G8JNJ, et al)
       The mouse wheel can now tune the frequency as well as adjusting the zoom.
       The right-click menu has a new entry controlling whether tune or zoom is the default.
       This setting is remembered in browser storage for the next time this Kiwi is visited.
       Depressing the wheel button while moving the wheel will temporarily select the opposite
       action, e.g. zooming if the wheel is set for tuning. This also applies to laptop trackpads
       that been configured for mouse wheel emulation, e.g. two finger up/down swipe.
(less)
NAT rule on router forgotten

HB9TMC

January 11

Could it be that the kiwis IP adress changes after it was switched off?
Random overnight restarts/reboots? [probably changes to DX label community database]

HB9TMC

December 2024
That sounds like a power supply issue, I've never seen unexpected reboots.
Maybe you can see using journalctl whether it was a clean shutdown, in that case there would be something like this:
Dec 15 11:… (more)
That sounds like a power supply issue, I've never seen unexpected reboots.
Maybe you can see using journalctl whether it was a clean shutdown, in that case there would be something like this:
Dec 15 11:27:44 kiwi systemd[1]: Reached target Shutdown. Dec 15 11:27:44 kiwi systemd[1]: Reached target Final Step. Dec 15 11:27:44 kiwi systemd[1]: systemd-reboot.service: Succeeded. Dec 15 11:27:44 kiwi systemd[1]: Finished Reboot. Dec 15 11:27:44 kiwi systemd[1]: Reached target Reboot. Dec 15 11:27:44 kiwi systemd[1]: Shutting down.

(less)
output voltage from the RF input on KiwiSDR2??

HB9TMC

November 2024

Another possibility would be that the kiwi's power supply has a Class-Y capacitor that leaks common-mode voltage to the DC side, which is then coupled trough the loop to ground.
In that case you could… (more)

Another possibility would be that the kiwi's power supply has a Class-Y capacitor that leaks common-mode voltage to the DC side, which is then coupled trough the loop to ground.
In that case you could measure an AC voltage between the Kiwi GND and PE.
(less)