jks

A few small changes in today's update:

v1.306  July 18, 2019
    Admin GPS tab improvements:
        Galileo sats in alert are removed from the channel after a few seconds.
        New priority mode for QZSS. It's been pointed out that because there are relatively
            few QZSS sats at present (4 currently) they can be unfairly "locked out" if many
            Navstar and Galileo sats are being received and taking all the channels.
            If the priority checkbox is set the last two free channels are reserved for QZSS sats.
            This number is reduced if sufficient QZSS sats already occupy a channel.
            For example if 3 QZSS sats have a channel only one is reserved to try and capture the 4th.

Thanks to Kiwi forum member @fractional_n for the suggestion about QZSS.

So we got this working with the two Kiwis on ports 8073 and 8074 respectively, behind the 4G router and the proxy enabled for both.

Also, the Kiwi network scanner (kiwisdr.com/scan) has been updated to version 1.5 and allows you to specify the port number instead of always using the 8073 default. Handy in the case of a Kiwi with port number other than 8073 with a local ip set by DHCP, and the ip has moved and you don't know what the new one is.