Please visit kiwisdr.com (documentation) and kiwisdr.nz (online store)
jks
About
- Username
- jks
- Joined
- Visits
- 30,581
- Last Active
- Roles
- Member, Administrator, Moderator
- Points
- 239
Reactions
-
Is there any gain control?
Hi Neil,If you press the "more" button on the lower right control panel you'll see various AGC parameters that can be adjusted. Changing the Threshold and Slope will effect the gain. There is also a Manual Gain slider that becomes active if you turn the AGC off.There is the volume control of course. There is no hardware gain control in the RF front-end. This was a cost tradeoff. -
WSPR Upload Fails?
-
Blank web page problems
-
Blank web page problems
-
Blank web page problems
The other thing you can do to get more printf output from the kiwi server program is to run it from the shell instead of as the usual daemon process. Do a "cdp" to get to the build directory. "mst" to stop the daemon. Then "k" to run directly. Not all the kiwi program printfs go to the syslog file to keep the log size under control.After you're done and control-C to stop the "k" program. Use "msa" to restart the daemon (or "ku" -- kiwi up).