alain_
About
- Username
- alain_
- Joined
- Visits
- 191
- Last Active
- Roles
- Member
- Points
- 5
Comments
-
That could be the explanation... :/ Thank you
-
Ron, Thank you for the promt reply. Holy cow, your setup puts mine to shame!... Unfortunately I cannot put my hands on my receiver as it is located in Europe while I am in the US. I will however definitely try to set 10 base on the eth card. Alain
-
Ron, I believe there were no updates. If the eth cable was the cause I wouldn't have been able to login via sshd. But I have... Alain
-
I forgot to mention that I use the Chinese Linear Power supply suggested in the KiwiSDR documentation. The board is not enclosed
-
I just finished installing a 1.2 meter copper loop with a commercial LZ1AQ amplifier. The station is in Central Italy. The overload indicator was up all the time so I temporarily installed a 15dB attenuator (by Mini-Circuits). The indicator is now …
-
The problem seems to be my 32GB micro SD. Worked fine with a 4GB card. I guess I have all the answers to my questions now... Thanks anyways!
-
I guess its backing up the whole thing. The problem now is I'm getting this:ADMIN: received microSD_write-----------------------------KiwiSDR: copy eMMC image to micro-SD cardVersion: [1.20151007: gpt partitions with raw boot...]--------------------…
-
The new clone solved the issue. Case closed. Thanks!
-
I see a lot of empty files... I believe that is not right:root@kiwisdr:~/Beagle_SDR_GPS# ls -latotal 92Kdrwxr-xr-x 17 501 staff 4.0K Aug 10 2016 .drwx------ 5 root root 4.0K Aug 10 2016 ..drwxr-xr-x 3 501 staff 4.0K Aug 10 2016 arch-rw-r--r-…
-
The commands provided shows nothing in particular:root@kiwisdr:~# cdproot@kiwisdr:~/Beagle_SDR_GPS# mdimake: *** No rule to make target 'disable'. Stop.root@kiwisdr:~/Beagle_SDR_GPS# mstmake: *** No rule to make target 'stop'. Stop.root@kiwisdr:~/…