WA2ZKD
About
- Username
- WA2ZKD
- Joined
- Visits
- 16,165
- Last Active
- Roles
- Member
- Points
- 14
Comments
-
While not cheap, even used, the Acopian 5EB250 @ $30+ is a great choice. You can find them on eBay
-
so how do I init "an internal 24/7 WSPR process"
-
I can get part way there. I installed lynx on the BB and it accesses the kiwi "part way"
-
a further thought... 24X7 use does not allow updates. If ssh invocation of wspr would alone there to be a cron job that allows for shutting done the wspr, doing an "up", then restoring the wspr session(s)
-
No, done buying for now! Have a network of 15+ Perseus in place in addition to the public ones, but access to them is too difficult at times
-
We also have some remote Perseus in place but those are limited in how they can be accessed due to their use of of a UDP stream. The kiwiUDP solves that problem.
-
put ferrite at the base of the whip
-
Regarding putting it is a box.... On day 1, I placed mine on a plate that was well grounded. I explored the spectrum and didn't note any noise without an antenna attached. Regardless, I added the perf-metal Faraday shield show here:http://forum.kiwi…
-
https://en.wikipedia.org/wiki/Massdrop
-
I see enough people signed up that the price is now $229+shiping
-
I was hoping others of you might add info on your own stations into this thread!
-
if he could ssh in could he do it? I have my systems here such that I can ssh into them.
-
perhaps you can tune to some quiet freq up near 30 MHz for the time being
-
oops.... typo http://rx.jimlill.com:8073
-
I don't experience that here. Try listening on my station http://rx.jimlill.com:8073 [jks edit: URL fixed]
-
One peeve of mine are the receivers I see that use the default log, dx.json, as-is or add their own local stuff to it. It takes a little effort, but it's far more meaning to have only entries that your receiver can actually receive!
-
My efforts are always towards making my system better. Whether it be a good antenna, better shielding, addition of ferrites, or whatever, there's always something to do. Just when one thinks they are done, something changes, usually in the form of i…
-
works now
-
admin page does not load on Linux Mint / Chrome, did forced reload etc.
-
I agree. One thing I suggested in a post awhile ago is to change your webpage settings so that your actual receiving capability is listed, not the default 0-30MHz. For example, when I had a AMBC HPF, I claimed 1.6-30, when I switched to notches, I c…
-
ref: fldigi.. what server string do you use ?
-
I started out with the cage to eliminate stuff within my shack etc. When "new stuff" appears I can rule out that entrance point without touching a connector. I have found that my own LCD TV gets in through my Loop but I an going to experim…
-
I added my simple Faraday cage to keep some of that stuff out. You can see the pix in my review post.
-
OK, I have pavucontrol and pulse going. Just need to figure out how to get audio to loop back into app
-
I have pondered whether turning it off could reduce the BW need by slow clients
-
no kiwi core dump files founf in /tmp
-
WSPR seems to speed up the freeze but I let mine run overnight just monitoring some CW and it froze after 8 hours. Yesterday with wspr it did it about 4 times in 8 hours.