WA2ZKD
About
- Username
- WA2ZKD
- Joined
- Visits
- 16,165
- Last Active
- Roles
- Member
- Points
- 14
Comments
-
You may wish to break your USA sites down by State
-
In addition to Top Spotters site there is also http://www.jimlill.com:8088/index.html
-
I have 3 systems online and am never happy with any of them. RFI, CMI, and overload can be tough enough on a narrow BW system but the 0-30 MHz nature of a Kiwi can make it even harder. jimlill.com:8073 and 8075 are here at my home QTH whereas I have…
-
FWIW... NAA @ 24 KHz is in Cutler Maine and close to my Maine system rx2.wa2zkd.net:8073
-
not sure how I saw 4 Hz earlier but with 20 Hz now, I can detect morse Edit: I get 4 min in AM and 20 min in SSB/CW
-
Yes it is hard to explain! I suggest you use nomenclature like TX1, TX2, RX1, RX2 etc in place of brother and friend etc.
-
could you make these buttons a bit narrower and add a new button [OPT] (options) that opens up below where more stuff could be added or moved to? https://forum.kiwisdr.com/uploads/424/811TROKDQN5V.png
-
:-)
-
Shane... you'll need to the make the change here https://forum.kiwisdr.com/index.php?p=/discussion/2541/howto-use-the-owner-info-and-additional-html-fields-on-admin-webpage-tab#latest
-
I fixed up the server data and think the result looks quite nice
-
I thought it might bre but my first attempt retained all the tags I had used with the other method
-
It'd be nice if I could figure out how to replace the Owner Info with it
-
A Chrome thing... Firefox OK
-
I tried other systems and same , so may be my browser, I will explore
-
Thanks..... after making some changes on the data server I refined it to <div style="width:800px; height:30px;position:relative;top:1px"><object data="http://jimlill.com/sun.html"></object></div>
-
can you screen shot what you added on the admin page and post it here? I get https://forum.kiwisdr.com/uploads/894/A8CDZYNLM1PJ.png after adding https://forum.kiwisdr.com/uploads/790/WY5CO832967M.png
-
see this thread at bottom https://forum.kiwisdr.com/index.php?p=/discussion/comment/16085/#Comment_16085
-
Thanks, I changed the stuff on the server that creates that info and then added <object data="http://jimlill.com/sun.html" style="width:500px; height:42px"></object>
-
I tried to put this in but it messes up the top format a bit <div><object data="http://jimlill.com/sun.txt"></object></div>
-
at very top of normal user page?
-
I've added the X-ray level to http://www.wa2zkd.net/sun.html It shows the Flare Class and magnitude.
-
https://forum.kiwisdr.com/uploads/694/ZUKJNPQQFF3G.png The next evolution... no more Linear PSU, now using Meanwell Industrial DIN mounted switched GPS distro using Glenn's Board new 4-way splitter for vert dipole antenna system AirSpy HF+ w/Inovato…
-
see the post before yours.... just add that line in your admin webpage tab
-
a plenum for a single AC high-quality fan
-
the guys behind HF trading. acresearchinc.com
-
the simplest implementation would be: https://forum.kiwisdr.com/uploads/864/AD2P5I1YH0QZ.png
-
you are welcome to use this: http://www.wa2zkd.net/sun.html Which you could add in your <head> element
-
Reducing the AGC decay to minimum can help mitigate the effects of the crashes. It will not remove the crash but will reduce the "deaf time" that follows.
-
As the wspr and ft decoder both run on the BB, I would thinki that the over the network latency would not apply.
-
I use that same data in some non-ham projects so gather my own.