WA2ZKD
About
- Username
- WA2ZKD
- Joined
- Visits
- 16,165
- Last Active
- Roles
- Member
- Points
- 14
Comments
-
http://forum.kiwisdr.com/discussion/comment/11126#Comment_11126 That would depend on if he is using 2 antennas.
-
the wsprdaemon approach is pretty slick. I have 2 14 ch kiwi/BB-AI units and record 28 channels at once with a little Odroid XU4 SBC
-
antenna comparison project?
-
Us oldtimers rely on Simpson 260 VOM at times! Glad you got it fixed
-
restrictions in Japan influeneced some of the designators earlier
-
both 80 and 60M have the freq. disparity isues. In effect, there are 2 sub-bands on each of those bands. as of right now... here the TX count on those bands http://forum.kiwisdr.com/uploads/592/TS7F4UXUDITE.png People are just not moving.... http://…
-
To null, use SAS mode and select the "audio" tab on the main control panel. On the bottom SAM line you should find the "channel null" menu. Select "null LSB" or "null USB". Is SAS a typo? No null menu, only i…
-
Works well on my Samsung phone
-
I had a couple forum systems working but not enough attendees to bother with so nothing for a couple years. I started out on Landline BBS's 30 years ago
-
I disliked the original skin here last week but this new one is quite nice.
-
I had grounding blocks and they weren't reliable outside, so I switched to the bulkheads, cheaper too
-
I made some simple brackets that clamp to the ground rod and have 3/8" holes. I put "F" bulkhead barrels in the holes and that becomes a splice point, ground point, a bit of a lightning arrestor point. The ground is zero length.
-
I have several of these around from Odroid/XU4 work. For a switcher, they are quirt but they also provide a good Kiwi Power source for troubleshooting or workbench config etc. https://www.amazon.com/Adapter-Switching-100V-240V-Charger-WeBoost/dp/B08…
-
I have 4x BBAI+Kiwi connected to single 10A Acopian Linear supply set to 5.16VDC. They've been running for 1+ year, never an issue.
-
Remove the SDR Cape from the BB and treat the BB standalone and see if it boots
-
admin console passwd root is my usual get out of jail free!
-
There is related info here but it appears that many .cn links are dead or blocked https://www.cttic.cn/uploads/15/file/public/201705/20170504033407482.docx
-
Yes, but it gives more info on the station which is what the OP asked.
-
https://shortwavedxer.blogspot.com/2013/04/guangzhou-coast-station-china.html
-
WINB?
-
I agree but this person didn't find that. Maybe a brief mention in the existing docs where wspr is discussed is worthwhile.
-
The wspr autorun. I know all about using it but he asked me since he couldn't find any docs, nor could I.
-
Phil... be aware that in some cases the website's host or local government can impact these decisions, not simply the page's author
-
I tried wifi versus wired and found no improvement over my apparently well-engineered wired scheme
-
on the admin webpage tab, did you add something in the additional html box?
-
I suggest you review each of the admin tabs and watch for things that look odd or wrong, and correct them if noted. From my own experience, a simple typo can cause really odd behavior that might not be noted until you browser refreshes or the cache …
-
You may have made a mis-edit in the admin set up... this is a clue (Image)
-
Here's a graphic which shows the scalloped pattern I mentioned (Image)
-
The so-called polar hole is not a hole concentric with the pole. The coverage is more scalloped shape and its impact depends on your longitude.
-
You should know right away if it helps by seeing what sats you get compared to the (few) you have in the posted graphic above.