WA2ZKD
About
- Username
- WA2ZKD
- Joined
- Visits
- 16,165
- Last Active
- Roles
- Member
- Points
- 14
Comments
-
One thought is to ssh in and and go to root home and rename dx.json dx.last and then put dx.min,json online as dx.json . If that works, it points to an issue with dx.last https://forum.kiwisdr.com/uploads/365/HG52CAT0U7D4.png
-
the tally is done to 6%.... I have been following up on CONUS systems that have low noise/spurious with an additional prod.
-
must have worked.... there's 20 less than 3 days ago....
-
there is some hope.... I contacted one OP and he thanked me and is now running 1.497
-
yes, I knew you had done that but was shocked to see 10+% still are in that state. Like you say.... up to them.
-
Wow of the 671 RX online at the moment, 72 of them are stuck at 1.462. More than 10%. I was going to reach out to the sysops and advise them but at 72, a big project for me. Something for a retiree :-)
-
I simply had app ruuning on a 3CH local kiwi and after a minute it crashed
-
just did a git pull... latest seems less stable. will send crash log
-
distribution of binaries rather than local builds has been mentioned and would solve a lot
-
you might be able to achieve the same thing with an Audio Compressor in your audio path
-
May I suggest.... Make an outline of the proposed sections: Install, Basic use, Extensions, etc. and have people who have some expertise volunteer to write or vet each section.
-
changes like that need to be optional from the admin pages.
-
Larry asks..... "or a northerly exposure?" those N of the equator should never point a puck north..... there's the potential for poor coverage if you point towards the pole. https://forum.kiwisdr.com/uploads/223/KEWPFGT7Q7SX.png
-
CPU temp only on BBAI/14 ch
-
for reference, I have 2 14ch BBAI feeding the 26 channels to the XU4. I left 1 ch on each kiwi availablle for me to connect and monitor eg: https://forum.kiwisdr.com/uploads/416/7BYEEVS6JX86.png
-
what else is the RPi doing other than WD? I run 28 channels through an Odroid XU4 running 2.10k without an issue but that is right on the edge of too much for it.
-
I have 2 kiwi with BBAI 1.489 and 2.10k WD running here and am not seeing that.
-
perhaps related........ https://forum.kiwisdr.com/index.php?p=/discussion/2490/clone-password#latest
-
I'll have to review the schematic before I refine my question.
-
I wonder what the range of the ext. clock can be? Is it limited to 66.66
-
https://www.amazon.com/Constant-Temperature-Insulation-Thermistor-Element/dp/B07NYX5DKD/ref=asc_df_B07NYX5DKD/?tag=hyprod-20&linkCode=df0&hvadid=366457540956&hvpos=&hvnetw=g&hvrand=4617244626728724054&hvpone=&hvptwo=&…
-
this may apply, depending on what you want tthe ext. XO for... https://forum.kiwisdr.com/index.php?p=/discussion/comment/11368#Comment_11368
-
from using search function....... https://forum.kiwisdr.com/index.php?p=/discussion/comment/6329#Comment_6329
-
I think now the issue is BBAI config -> BBG as the PW is solved
-
That sort of worked..... it no longer gives me a bad password display, it says cloning from 192.168.1.75 as it should but... it never seems to finish.
-
I am trying to clone a BBG from a BBAI box.
-
Marco... I too am enjoying "SSDR" and thanks for much for your efforts.
-
(in Linux) with no CAT I find that hitting the spacebar closes the program
-
are you accessing it locally?
-
new BBAI post suffices for me