WA2ZKD
About
- Username
- WA2ZKD
- Joined
- Visits
- 16,165
- Last Active
- Roles
- Member
- Points
- 14
Comments
-
at the OS level, where do I find the kiwi logs
-
on a related note.... the "troll cycle" always lasts 1:32
-
These guys seem to be a prime source of the recurrent kiwirecorder.py connects. https://www.choopa.com/datacenter/
-
I have 4, sometimes 5 at my location running. I brought some order to things by assigning the LAN IP and port as such: 192.168.1.73:8073 ..... 192.168.1.75:8075 etc.
-
https://www.python.org/ftp/python/3.10.4/python-3.10.4-amd64.exe here's what you need for W10
-
Just install python on your Windows box and you should be on your way. That install is pretty much plug and play after installing python get into a command line prompt and use the command pip install numpy I just did that fresh on a W10 box and it …
-
I put it back to 9.9 and all built and works fine. Not sure what @rz3dvp did to get 10 going
-
@rz3dvp. perhaps you could post some script snips to show how yo udo this
-
My misery may be self-imposed. I upgraded to Buster to get the rest of Linux current for that non-kiwi stuff I am going to trying to run on the same BBAI dog output: Debian 10.11 BeagleBoard.org Debian Buster IoT TIDL Image 2020-04-06 Linux beagleb…
-
John.... I'll back up a rev. if needed!
-
I am trying to build a system on a new BBAI with buster installed. when I run the make I see Makefile:1016: warning: overriding recipe for target 'install_kiwi_device_tree' Makefile:1000: warning: ignoring old recipe for target 'install_kiwi_device_…
-
if you go right into the admin status page, does it freeze up there?
-
which OS and browser are you using?
-
my waveform professional buddies advise that the SDR-Console SNR method is pretty sound. See comment from Benson above. https://www.sdr-radio.com/s-meter
-
Yes, I was hoping people might post some code snippets
-
perhaps someone needs to subscribe, then access their own kiwi and see what IP# appears on it
-
sort of sleazy IMO
-
SDR-Console App has an SNR meter option.
-
I know that..... had not heard of bots in Singapore before. They run a tight ship there so surprised
-
a single Sinagpore connection? There are legit users there.
-
now I can't remember what I called it in the subject of my original post! :-) Thanks for the clarification.
-
this was the area I was referring to... https://forum.kiwisdr.com/uploads/266/I9CY5CPT7PI2.png
-
Thank you for the clarification
-
New unit? then it's updating its firmware and that may take an hour.
-
Syllabic squelch = VAD WebRTC seems to have some promise https://github.com/wiseman/py-webrtcvad
-
I have contacted a few US OPs directly offering to help. They were having troubles, helped them through it and we're now down to < 5%
-
can that filter be applied to the output of kiwiclient/recorder sessions?
-
order radios might be using 2G ALE and 39T modem for data and/or digital voice
-
The 8-ary tones that ALE uses are somewhat unique to ALE. After the linking there is no restriction on what info is sent.
-
yes, it is 2G ALE