Powernumpty
About
- Username
- Powernumpty
- Joined
- Visits
- 5,458
- Last Active
- Roles
- Member
- Points
- 29
Comments
-
OK and what does the admin log show as the connecting IP when using the using the public link, and then the private? By public address do you mean the address as would be listed on rx.kiwisdr.com? and private IP as an IPv4 address like 192.168.0.1:8…
-
What happens when you hit reload, or (Windows) control+F5?
-
If you add new one can you edit it then? I just created the same (new) entry and then edited twice, all good. Also did you edit the Ident and Notes fields or the frequency too? How long did you wait? BTW I could not download/view the gif other than …
-
I misread the subnet on the208.85duplicate. Was on a different port so assumed that was why the Kiwi didn't log it. Sorry to be disturbing. I looked for any entries like rz3dvp had but none listed here and the abuseip and scamlytics entries looked l…
-
Today's Vultr Canada 208.85.22.113 208.85.16.0/21 They must run out soon, I thought IPv4 addresses were in short supply.
-
With the amount of people out there who have little Linux experience its probably no bad thing that it is not a "One command and three days of support" event. Technically I doubt your have "bricked" it, just done enough outside …
-
So I blew my router config, had to use a spare, was visited by some new (Constant Company) addresses. 139.198.178.150, 70.34.243.4, 155.138.233.149 139.198.0.0/16 70.34.240.0/20 155.138.224.0/20
-
Many thanks
-
Hi Martin, At work I have a MediaWiki set up for those 'every two years' jobs, saves having to search emails for previous instances of the same issue / solution, also should help the next guy or cover. Without trying to tempt fate, the Kiwi is very…
-
New Vultr seen today 208.85.22.113 In case anyone wonders, I had issues with Vultr so blocked a few addresses, since blocking them I realised I had constant port scans from these ranges, just checked from five days ago and in the order of 10k scans…
-
On desktop OS, the input box is about 20 characters, the single line visible about 39 so not sure what point there is above about 20-25? I would assume most software could be abbreviated to fit and can't see HAM or SWL calls going over the the basi…
-
Sounds plausible I spotted this early on but didn't see the point in mentioning it, overload is now the point. SNR: All 14 dB, HF 10 dB Also if related to overload the duration would reflect the time of day(?).
-
This could be either end, the PI needs to be able to get to the Kiwi reliably so if you have a third machine (E.G. windows) run two terminals at roughly the same time. That should give you a comparative result close enough to see what is happening o…
-
Sorry on the temp I saw mention of AI early in the thread. On the ping did you run it for over the duration of drops? By Ping "not influence connections from wsprdemon of course." Do you mean the wsprdeamon is running on the same device? …
-
There is the car repeater trick too. Cheap car repeater with its GPS antenna exposed to as much open sky as possible, as jks says better towards the equator than poles. That can give an extra 3/5M then stick the Kiwi GPS antenna and the repeater TX…
-
How is it networked? If you do a continuous ping from another device is it stable, or does that drop? Is it publicly accessible? Also from an ssh terminal (copied from the AI thread) "Type "ct" to check cpu temp (divide by 1000 for d…
-
Waterfall settings on the config page.
-
On the clone thing I wonder if "clone to file" would be possible, so it creates a temporary compressed file of the configs with a long random name that can be downloaded via normal http (+proxy) E.G. "mysdr.here.url:8073/OPihOf78sa87…
-
I use this basic setup and this seems to work OK *.=info;*.=notice;*.=warn;\ auth,authpriv.none;\ cron,daemon.none;\ mail,news.none @<external log server IP> (Make sure there is no mention of /dev/xconsole)
-
Is it the same after a power cycle?
-
I have that one blocked at the router from October 2021. I only block 3.35.217.0/24 and have not noticed a wider issue (until I post this and they move).
-
The username under 10 is debian (root ssh not allowed by default) so it probably required debian and the serial number. On 8 I beleive it depends if you have already a set a password and what version the install image starts from, or is currently up…
-
The web server won't start if it can't talk to the FPGA (doesn't know a cape is connected). If you say more specifically, the 'issues' you had on Debian10, that might help diagnose. Was it that you could not get 10 to start installing at all, even w…
-
Sounds good, I think the traffic I saw was trying well known directories and if it has been previously indexed, the structure. If the Spiders don't get much on any visit the impact should be negligible. Not sure if they really respect the noindex m…
-
Having port 80 open for LesEncrypt renewals is something that has caught me out before, increases traffic of course as the crawlers find the port open and regularly scan for content updates and poke other common ports. I wonder if a separate threa…
-
New Vultr seen today 67.219.111.113 Might be OK, but worth checking logs for issues around that time (IMO).
-
Nick, As there is proper answer from John I'll stand down, but will just fill in why I asked a couple of those questions. WiFi, you must be in a much more rural location than myself, WiFi here at 30ft gets knocked out by competing devices and if I'm…
-
Hi Nick, I'll throw some questions out as this is the first I've heard unless related to DC cabling or connectors in the cold. Frost and mist provides good attenuation of 2.4GHz so Where is the BBB antenna located? Also how do you know it has not bo…
-
Also I just tried webdav to a nextcloud, could be good for sending to a remote (public) server? Assuming user K8073 Password K8073password Fictitious domain https://mynextcloud.somepublic.domain cd to kiwi.config and (for each file) curl -X PUT -u …
-
Yes it worked well, over RDP+VPN (it was a bit of an unfair test) but I knew the works antivirus would probably stop it (traps ALL new software) so only tried remote. Audio was pretty good over RDP and that wrecks most things. Will try it properly …