Gibsonmb
About
- Username
- Gibsonmb
- Joined
- Visits
- 82
- Last Active
- Roles
- Member
Comments
-
.......... and also permanently disable the Cloud9 IDE as I assume it uses a bit of CPU in the background monitoring port 80 (and hence more heat).
-
Guys, how do I make it so my CPU speed is set to 1.18Ghz permanently so that when it reboots it does not revert to 1.5Ghz? Do I need to nano a file somewhere? I want to set the cpu speed that bit slower whilst I'm sorting out the cooling.
-
Back on-line in public now. Just waiting for larger end fan to arrive to supplement the Farnell cape fan as temp still a bit high. I will also raise the sdr away from the fan cape with header risers..... also awaited. Thanks again for your support
-
Great, looks to be working now. I've powered it down short term because now of course it's running at 1.5Ghz and thus I need to tweak the cooling. I also need to do a bit work on the filtering on the linear PSU feeding it and move the sense leads cl…
-
I agree on the quality of this radio and also, not supporting low value, low support clones. I bought this in 2016 and it's still going strong. I bought it as a complete kit with the BBG and added the SEEED Studio aluminium case. I've got an SD card…
-
Done...
-
I only have the router from BT. It has a firewall build in but once I've set a port open, I can normally log in without problem from other locations. The firewall can be turned off but you still have to put the port routing in. I can of course set t…
-
Not sure why the ssh is being closed. I've just routed it straight through ( I hope). Should I leave it set up this way for a few days in case you get a change to look at it again or will you take a look on a test system of your own? regards Mike
-
http://forum.kiwisdr.com/index.php?p=/discussion/comment/11704#Comment_11704 Ready for you John as per email
-
root@beaglebone:/home/debian# i2cdetect -l i2c-3 i2c OMAP I2C adapter I2C adapter i2c-0 i2c OMAP I2C adapter I2C adapter
-
http://forum.kiwisdr.com/uploads/362/U05QTKQ5MXYO.jpg Just for completeness
-
OK John, many thanks. I'll open up port 22 tomorrow and route it to the BBAI. Is there a way I can advise you of the log-in details a bit more privately?
-
Yes it's genuine, bought from Martin Lynch &S or Farnell here in the UK in about 2016, has your name printed on the PCB John. I can send a photo of the serial number hand written in black pen on a white background if you like. It must go into a…
-
Just to be sure of the PSU, I've hooked up a bench PSU set at 5.2V and max of 6A, The BBAI/SDR combo peaks up about 2.1A during start-up and settles at 1.3A no activity. Plugged it back into BBG to make sure I've not bricked it. No, still working fi…
-
that I was using on the BBG
-
yes, via the cape barrel plug with a 4A 5v PSU
-
This is what I get with that tail command... Apr 7 12:44:49 beaglebone kiwid: 00:00:00.499 compiled: Apr 7 2021 12:07:08 on beaglebone Apr 7 12:44:49 beaglebone kiwid: 00:00:00.500 -debian 9 …
-
So now, I've done a make clean, make, make install again with the sdr plugged into the BBAI. Same state afterwards. All processed OK, no error messages. Rebooted. Just the same. Once additional point, If I go to port 80 I get the cloud 9 IDE so I kn…
-
OK, I'll give it a go. Was just slightly worried that if I built the BBAI with the SDR plugged in that it may change the configuration of the SDR in some way and I might not have been able to go back to the BBB if the BBAI did not work out. You've a…
-
Thanks, that's very encouraging. Just for info, Chrome on my Macbook does not exhibit the popping problem
-
All very well Canary not having the problem but Canary is somewhere even before Beta. When might we get a fix for this if we stick with released versions of Chrome? I've downloaded Firefox fro now to test and the problem is not there on Firefox. Bef…