WA2ZKD
About
- Username
- WA2ZKD
- Joined
- Visits
- 16,162
- Last Active
- Roles
- Member
- Points
- 13
-
admin page won't load [solved]
Happy to report that fixed it, took a while... patience paid off!
-
New Antenna on jimlill.com:8075
next week, I'll raise that up another 8ft. I also knocked some other spurious noise here. Yesterday, I was 13th worldwide for wspr reporters, up from about 50th!
-
New Antenna on jimlill.com:8075
Found and fixed 10 MHz issue, my wspr unique count is up 25% with new antenna. many signals 6-10 dB better SNR than with my Pixel Loop
-
New Antenna on jimlill.com:8075
Found and fixed 10 MHz issue, my wspr unique count is up 25% with new antenna. many signals 6-10 dB better SNR than with my Pixel Loop -
New Antenna on jimlill.com:8075
Found and fixed 10 MHz issue, my wspr unique count is up 25% with new antenna. many signals 6-10 dB better SNR than with my Pixel Loop -
SSH port
you can use this command systemctl restart ssh.service from the console window of the kiwi admin -
Kiwi BBAI software installation instructions [updated 4-Mar-24]
I'm taking a "just add air" approach.
- removed internal fan
- mounted BBAI on 1/4" standoffs
- raised cape with extension headers
- mounted fan from slot cooler on modified endplate
- flipped and… (more)
-
Online status
I didn't add any heatsinks, just blowing 42 cfm through the "tunnel" -
Can't access admin page [solved]
I disabled the Cloud9 stuff and all is better
sudo systemctl stop cloud9.service || true
sudo systemctl stop cloud9.socket || true -
wsprdaemon noise graphs
added station
