WSPR Spurious signals?

BjarneBjarne
in KiwiSDR Discussion
I have noted that "strong" wspr signals (in this case SNR=6) is accompanied with spurious signals 76 Hz above and below the nominal frequency. A friend of mine also noted this, and compared with his IC-7800 on which no spuriosa is noted. I can't imagine that the signal itself would overload the Kiwi, so perhaps a software issue? The screendump shows SM0MDG which is the strongest wspr station here (5 watts at 1336 km). 

Attachments:
https://forum.kiwisdr.com/uploads/Uploader/43/64a34cff3109ca39f1332130327b03.jpg

Comments

  • jksjks
    Yes, this is a known problem with other WSPR programs as well. Although I always thought it seemed to be worse in my implementation. In the WSPR code I started from there is actually some code to prevent the double-reporting of strong signals with images.

    One of the last changes I added was some input resampling to handle a change to the audio sample rate of the Kiwi. It is quite possible that I'm not filtering the resampling properly. I'll add it to the bug list.

Sign In or Register to comment.