Comments
-
I don't do social media proper, but you can add me to the list of those who would buy the new and improved KiwiSDR-2 whenever it becomes available. 73, and Happy Holidays!
-
Thanks for the suggestions. The band was shutdown by that G2 geomagnetic storm on Sunday and it's recovered. I see that my FT857D and WJST-X have decoded and spotted six 22 m WSPR signals while the KiwiSDR WSPR autorun extension has decoded and spot…
-
Update to the new v1.552 and nothing received by 22m WSPR autorun extension on my KiwiSDR. I'm using a 5-port antenna coupler and my FT857D + WSJT-X is decoding and spotting 22 m WSPR signals as "ROMSWL" but so far, the Kiwi 22m WSPR autor…
-
Well at least K3KQ and his Kiwi, which seems to work fine and mine doesn't! It does take me three or four reboots to get it to log onto my LAN (ethernet cable connected). So it's always been "finicky".
-
Okay. I setup my FT857D and WJST-X as "VA3ROM" to monitor 22 m and lo and behold received and spotted these WSPR signals to the WSPRnet: 1654 -29 2.0 13.555315 0 W8AC EN91 7 1006 1658 -30 2.2 13.555315 0 W8AC EN91 7 1006 1708 -24 1.3 13.55…
-
I'm using my KiwiSDR and WSPR extension to receive WSPR signals (40, 30, 22, 20, 15, 10 m) as "VA3ROM". My "1X3ROM" remote telemetry-over-WSPR transmitter is only used on 22 m because Canadian Amateurs can't transmit out of band…
-
I think the problem is that WSPR is, in fact, an FSK mode and FSK modes are always specified by their centre carrier +/- x Hz. But SSB AFSK use of FSK modes screwed that since you can use different audio tones added to the side band carrier to creat…
-
Sorry, but I didn't know that you had "fixed" it because you never asked me for permission to do so in the first place. That would have been the correct and polite thing to do, IMHO. Anyway, it was offline when I came home, and not worki…
-
Nothing is fixed at my end. I still can't upgraded to latest version. I just came home and my KiwiSDR was totally bricked and was offline and I to reinstall the old 1.289 backup that I had top get it back on line. Should have make a later backup I g…