studentkra
About
- Username
- studentkra
- Joined
- Visits
- 5,491
- Last Active
- Roles
- Member
Comments
-
Thank you for your great work and hard work!
-
@jks, thanks! I'am "full zero" in FPGA programming)))
-
Hmmm. In "decimal" case my Android show this keyboard. Not like on photo in your link. https://forum.kiwisdr.com/uploads/707/2H7UCWAU4OVK.jpg It can be switch from original keyboard by pressing "123" ("abc") key in lef…
-
@jks , in version 1.517 you have used inputmode "tel" for the numeric keypad. But then change it to "decimal". Some of the users did not like this keyboard?
-
I also have a question. Will it work without a GPS chip? Or without powering the GPS chip.
-
https://forum.kiwisdr.com/uploads/825/G4ABIA4KEQQR.jpg Numeric keypad with large buttons for android to enter the frequency. Javascript for testing. Use Additional HTML/Javascript for HTML field. <script type="text/javascript"> setTi…
-
Ok. Change display frequency only for link. (Add new var copy_link) function freq_link_update() { var host = kiwi_url_origin(); var copy_link = (freq_displayed_Hz/1000 + cfg.freq_offset).toFixed(cfg.show_1Hz? 3:2); var url = host +'/?f='+ copy_li…
-
https://forum.kiwisdr.com/uploads/334/HZQCATC60S4B.jpg Yes. It works. I think))) It cause DX label troubles while editing. @jks, you are doing a great job! Thank you!
-
I add frequency offset in function freqset_update_ui() freq_displayed_kHz_str = (freq_displayed_Hz/1000 + cfg.freq_offset).toFixed(cfg.show_1Hz? 3:2); I think it works. No! it not works )
-
Thanks!
-
I'm posting here so I don't open a new thread. Function "copy to clipboard" does not add a frequency offset and frequency in the link is not correct. https://forum.kiwisdr.com/uploads/907/RAABX307O1EY.jpg
-
I understood you. My mobile keyboard appears only after tapping on the frequency input field. And never in other cases. By the way, it would be nice to make it so that this keyboard was immediately digital. Because you can only enter numbers.
-
Do you mean that on Android, to enter a new frequency, you must first manually delete the current frequency? I have exactly that.
-
Yes, try to divide each "hz_per_lage_marker" value by 4. "decimals" value means the number of decimal places on the scale. Each "block" corresponds to a certain zoom. I figured out why editing the file didn't work. You …
-
Martin, strange... It have to work only on maximum zoom. Add this script in Additional HTML/Javascript for HTML <script type="text/javascript"> var scale_markers_levels = [ {"hz_per_large_marker":10000000, //large "…
-
Martin, you have to edit file openwebrx.min.js Its is the same, but compressed. {hz_per_large_marker:1e3,estimated_text_width:70,format:"{x} ",pre_divide:1e6,decimals:3}] {hz_per_large_marker:250,estimated_text_width:70,format:"{x} &…
-
https://forum.kiwisdr.com/uploads/120/MVFBMTS0NPOL.jpg 😉 In openwebrx.js change last values in " var scale_markers_levels": "hz_per_large_marker":250, (was 1000) "decimals":5 (was 3) …
-
Changing the Kiwi logo in the top left corner , hidden band bar, transparent toolbar. <script type="text/javascript"> document.addEventListener('DOMContentLoaded', function(){ document.querySelectorAll("#id-left-logo").for…
-
Is your browser play audio from other services? For example, open YouTube in a browser and check the sound playback.
-
This is my temporary solution for std.swl. Modification of the freqset_car_Hz(fcar) function. Maybe it will be useful to someone. Perhaps @jks will implement something like this in the future. https://forum.kiwisdr.com/uploads/493/MT6WRXQ45P1U.rar
-
I have FlyDogSDR. Updates will come in few days or more.
-
I understood. One of this is my receiver. However, it is not exactly a Kiwi))) I'll test it when I get an update. Thanks!
-
@jks, thank you for your work! And what do you mean about "air-band Kiwi in Japan"? Did they have the same problem?
-
Just сomment out this function in kiwi.js file. function kiwi_geo() { //return encodeURIComponent(geo.geo); } Location will be "undefined" always. https://forum.kiwisdr.com/uploads/235/ELWQDUH2NX9J.jpg Or in kiwi.min.js file. I have no Ki…
-
tmp_offset has a step of 1 Hz and only affects to the drawing of markers on the scale. You can try 1Hz step. It does not affect the accuracy of receiving any way.
-
Yes. The offset frequency on the admin interface is still set to 1kHz. But you can use the ADC calibration for fine tuning.
-
The scale issue has been resolved. I think so ))) Changed in function mk_freq_scale() var tmp_offset = 250000; // Setting the temporary offset var spacing = get_scale_mark_spacing(g_range); g_range.start = g_range.start + tmp_offset; //Set new scale…
-
Thanks! I'll hope it will be fixed. I used a si5351 generator, that was fine tuned to 106.000 MHz. But it has a lot of spurs! I bought a 106.250 MHz crystal generator. Its frequency is much cleaner and I can't change it. But there was a problem with…
-
Error in rounding frequencies of large markers. var scale_markers_levels Temporarily set always rounding in two decimal digits. "decimals":2 Not very convenient, the markers are not at multiple frequencies, but this is a temporary solution…
-
ArturPL, if you have access to the kiwi.js file, you can simply change this string #16: volume: 50, 0 is minimum volume 200 is maximum.