rz3dvp
About
- Username
- rz3dvp
- Joined
- Visits
- 1,096
- Last Active
- Roles
- Member
- Points
- 5
Comments
-
I wrote simple bash script for backup /root/kiwi.config/ directory to tar.gz file with IP address and date on his name (look like kiwi.config_192.168.1.5_2022-01-12.tar.gz about 8MB). If I do any changes on Admin page I run this script under "d…
-
@jks Thanks
-
One of the important things for complete remote upgrade is upgrade U-Boot version: debian@beaglebone:~$ cd /opt/scripts/tools/ debian@beaglebone:/opt/scripts/tools$ git reset --hard debian@beaglebone:/opt/scripts/tools$ git pull debian@beaglebone…
-
I think this might be true only the very first time you ever use an sd card as a flasher. I only had it happen once using a fresh card during D10 development. And not in years using the pile of other flasher cards I reuse. I had same problem like @G…
-
@G4DYA You need disconnect power from BBG, insert micro-SD card, press the "USER" button and fix it, then connect power, after 30-40 sec your BBG start flashing from micro-SD card (see LED status) and you can release the button. After fl…
-
Yes, I understand, - re-flashing from microSD is faster and more stable way to upgrade, but if KiwiSDR is at a remote position, then this will be difficult. If you can give more info about how-to "apply all the Kiwi-specific changes to D10"…
-
@jks Thanks! Does it possible full remote upgrade Debian for BBG like for AI with change /etc/apt/sources.list?
-
May be, I use frps, but when I disable all extensions some of them remain active, but not all: http://forum.kiwisdr.com/uploads/167/4FXCIF8F8W9E.png PS this KiwiSDR for Air-band and I was trying to disable all extensions All extention disabled on Ad…
-
Hi, if I try to disable ALE 2G extension for user in Admin page it wasn't disabled... It's bug only on my KiwiSDR?
-
Sorry, but why do you need this function? I think this feature will only give you fake users from "alpha centauri". But if you want to parse the log files, you can ask your KiwiSDR users to add their location in the "Name" field …
-
If IP address for DDNS assigned directly to one of interface your router then you don't goes to Internet when type URL on browser and it look like loop. http://forum.kiwisdr.com/uploads/425/0S74PNDMTE9N.png For this to work, - you need to carefull…
-
@rrobinet too many unknowns 🤔 but I'm glad you could fix this problem! 😀
-
Hi @rrobinet, I saw so mysterious problems when channel MTU was deferent then known to the router, - small ping packets routing good but big (1470) not, some web site works but some not. OS use MTU discovery protocol for fix this situation but it wa…
-
@rrobinet first step - check access to kiwi's web server from local network for example (from any linux host in same LAN) curl -Is http://lanip:port if it works normal you should receive "HTTP/1.1 200 OK". If all answer was good you need c…
-
Something like this nano temp.sh: #!/bin/bash temp=$(cat /sys/class/thermal/thermal_zone0/temp) if [ $temp -gt 65000 ] then shutdown now fi Add execute right for file chmod +x temp.sh and add its running into crontab -e under root
-
Hello I am using BBAI on some of my KiwiSDRs too and this is my cooling version. I replace radiator on the BB-AI board to Cu from Ali, install horizontal fan with USB connection and use Adafruit stacking header for Beagle Bone: http://forum.kiwisdr…
-
@Gibsonmb you can add this command to crontab and it will start after any reboot, for example type sudo systemctl enable cron && sudo crontab -e and add to the end of cron file: @reboot sleep 10 && /usr/bin/cpufreq-set -f 1.176GHz &g…
-
Bot from IP 39.105.90.102 is very active now, I recommend for all put his network to BlackList, how did @Powernumpty to do or full CIDR for this IP: 39.96.0.0/12
-
@9BC357 May be this KiwiSDR owner don't use all channels all time and when some channel will be free you can listen it. You can ask about this Henry W6REK directly, his email contact on status KiwiSDR page or QRZ.com.
-
Just simple bash script for create ipset from this file on personal frp-server (for example): #!/bin/bash ipset -N kiwiblacknets nethash wget -q http://kiwisdr.com/ip_blacklist/ip_blacklist.cjson -O - | grep -o '".*"' | sed 's/"//g' |…
-
Only logs can give you more information about this problem, view it on Admin page when this problem back again, or share for community. Usually this effects observed when someone trying start “bad’ connections.
-
@9BC357 Hi, about http://75.144.20.99:8073/, why do you think it is bots? It's look like KiwiSDR owner processes, I think W6REK can use all channel on his KiwiSDR. 😉
-
@jks sorry, I wrote about frequency bar: http://forum.kiwisdr.com/uploads/562/A46YGGODAK7L.png
-
Hi @jks! If possible add frequencies line to jpg file with waterfall on the top and bottom.
-
It's one of "must have feature", - default settings for USB/LSB/AM/CW modes, like on the WebSDR you can set default low and high boundary for all modes by edit config file. KiwiSDR have cool "Admin" page with lot of settings but…
-
Нi all, I don't know why someone use the TOR for connect to KiwiSDR if he is an honest listener? Maybe add block TOR network on the proxy.kiwisdr.com server? It's don't difficult, for example on Ubuntu: 1. install ipset: >sudo apt install ipse…
-
Hello Rick, Maybe add rule for block the TOR nodes IP addresses on your router? 73!, Yuri
-
Like I know, - Git have build-in feature for switch between version without any copy to card. For example on the cdp you can use git log for find commit hash with interesting changes and then switch to it git checkout {hash} and now you can build i…
-
If I use "Next Kiwi URL redirect" future on Admin - Connection page it works for /?camp too, but it's don't good because I can't connect for monitoring this KiwiSDR or use queue.
-
For example, simple Linux bash command: curl -s http://kiwisdr.areg.org.au:8073/status | grep users= | awk -F= '{ print $2 }' returns number of active users for this moment. 73! Yuri