The KiwiSDR 2 online store is open for orders! Please visit kiwisdr.nz

hobergenix

About

Username
hobergenix
Joined
Visits
17
Last Active
Roles
Member

Reactions

0Helpful0Awesome

Comments

  • I set it at 5.1 for now. The power supply has two DC output jacks and I just purchased a second Kiwisdr and will run both on the same supply. I did look up some USB specs and found the min and max voltage stated to be 4.75 to 5.25 Vdc.
    in Variable power supply voltage setting. Comment by hobergenix December 2020
  • Thanks for the info. This will save me a few dollars in getting my second KiwiSDR up and running. I think in the early development a BBB was used and probably switched to a BBG to save a few dollars. I bought my first KiwiSDR kit on the MassDrop web…
    in Beaglebone Black with Radio Cape Comment by hobergenix May 2020
  • I will have to look at the specs on the board. I am not sure if having the extra electronics on the board for the HDMI display might cause any RFI problems even though no display will be connected. The version of my board dose not have WiFi. I alrea…
    in Beaglebone Black with Radio Cape Comment by hobergenix May 2020