The KiwiSDR 2 online store is open for orders! Please visit kiwisdr.nz

kiwiclient and AGC

WA2ZKD

WA2ZKD

October 2018 in KiwiSDR Discussion

('SET agc=%d hang=%d thresh=%d slope=%d decay=%d manGain=%d' % (on, hang, thresh, slope, decay, gain))

any more information on this?

Comments

jks

October 2018

No. You have to read the code. Each parameter there corresponds to a corresponds to a UI control on the AGC tab of the Kiwi control panel.
https://github.com/jks-prv/Beagle_SDR_GPS/blob/master/rx/rx_sound.cpp
https://github.com/jks-prv/Beagle_SDR_GPS/blob/master/rx/CuteSDR/agc.cpp
WA2ZKD

October 2018

No if you don't define anything, AGC is OFF?
daniel

October 2018

The server requires "SET agc" to be sent before it serves any audio. By default, kiwiclient has it on, using the same parameters as in the browser.
WA2ZKD

October 2018

Thank you!

or Register to comment.