Feature request - I/Q spectrum reversal option
I'm currently helping some friends who are keen uWave operators, to help develop a remote hilltop radio site.
One of the things I'm contemplating is to use the KiWi in conjunction with a uWave down-convertor, but the only problem is the choice of local oscillator means that the RF spectrum is 'reversed'.
I wondered if, in addition to the "Frequency scale offset (kHz, 1 Hz resolution)" option in the Admin / Config tab, if it would be possible to have the option to 'reverse' the spectrum, possibly by swapping around the I/Q signals ?
This would also facilitate reception of 33.3 to 66.6MHz (spectrum reversed) by a hardware modification of the input filter, or by completely by-passing it and using an external filter, which is probably the easiest to implement (and also reverse if required).
With propagation conditions on the HF bands improving dramatically, I'm now hearing quite a lot of activity on the low VHF bands, and it would be great to be able to add a further KiWi to extend the frequency coverage at an existing site, without the need for an external converter.