DX tags and filter
I'm currently using the DX tag filter to look for signals on certain frequencies.
For example I'm currently observing the 4-6MHz spectrum for new or 'unusual' activity associated with recent events.
It got me thinking...
I wondered if it would be possible to somehow 'highlight' the DX tag(s) marking an 'active' frequency, where a signal is detected within the passband defined in the DX tag ?
This would make it much easier to spot when one of the tagged frequencies has come into use.
Likewise (and I know I mentioned this before) it would be really handy to be able to setup a 'scan' list, like the ALE extension, in order to be able to 'scan' a defined set of frequencies, and either stop or pause for a defined period, whilst a signal is present (defined by the squelch setting) or to record and save an active frequency before resuming the scan.