k1ra
About
- Username
- k1ra
- Joined
- Visits
- 66
- Last Active
- Roles
- Member
- Points
- 5
Comments
-
Correct - I use kiwirecorder to pull in a four sequential, 15 second WAV files, which equates to four FT8 transmission windows per minute. This is on a single band and produces up to 25+ FT8 call signs decodes per quarter or >100 per minute. I…
-
Kevin, Yes I've compiled and been running the new FT8 v2.0 decoder on the KiwiSDR now for over a week using that and my on board PSKreporter upload script. With that I have been placing in the Top 20 world spotters on the stats page here https:/…
-
Christoph, Thanks for the suggestions. FT8 can detect signals down to an SNR of -24. I do understand I can run the recorder off box, but my goal is to run everything on the KiwiSDR/BeagleBone self-contained like I do with the Redpitaya. Maybe co…
-
Here's a follow up report on my desire to run the WSJT-X FT8 decoder and propagation reporter all standalone on my KiwiSDR. For my earlier work with Pavel on the Redpitaya, where I compiled WSJT-X for that ARM processor, I found I was able to tak…
-
OK - I'll give that a try first. Thanks! andyz