Comments
-
I did open the console and there were a few "undefined" errors. kiwi.(something), g_(something) and one other. I intended to save them but they don't seem to be at hand. If it happens again I'll post. I had been experimenting with one o…
-
I copied the config from another radio and it's working now. Don't remember changing anything recently, but I wouldn't swear to it. Thank you
-
Works now, thank you!
-
Client being used is https://github.com/jks-prv/kiwiclient.git master
-
Thanks Stu, this problem does seem to be Chrome related; I don't seem to have the issue in Firefox. I tried the disable page visibility extension, but it didn't seem to help. I suppose I could try a clean Chrome installation, but haven't. Jack
-
BTW, I checked several receivers on sdr.hu, and the ones showing versions prior to 350 have the problem and those at 352 work fine.
-
Like magic, it's fixed! Thank you!
-
Good point, but it is having the problem with a power supply I've been using for some time.
-
No go, the new Beaglebone will boot by itself but doesn't even light up when the Kiwi is connected. Time for a new one, oh well. Thanks, Jack
-
Ok, thanks, that's what I figured. I'm probably the only one dumb enough to let this happen, but it might be worth considering adding a hefty schottky reverse-biased diode across the input if you ever do another board turn. No guarantee it will h…
-
This problem seems to be resolved now - I expect it's due to a fix in Chrome.
-
I just got a new tablet - Samsung Tab S2 8.0 SM-T713 and it works well and consistently on that, other than the UI caveats (can't drag waterfall, etc.).
-
I do have the latest Chrome.
-
Very nice, it's much more usable now, thank you. I ended up doing a factory reset on my tablet and the audio is improved. My tablet is an LG V510 with Android 5.10 build LMY47O.L017 Chrome 54.0.2840.85 works pretty well, with roughly one ~100ms…
-
The page loads very slowly on both Chrome and Firefox, especially the initial photo and dialogs. The audio is choppy and you hear everything twice. If you get lucky you can change the frequency. The pop-up keyboard interferes badly with everything…
-
All fixed, thanks! Somehow the values were more like 0.5 and 0.6, but I set as you recommended and it's fine now.