blurryface

Comments

• Thanks for the reply. The ITU region was already set to R2 in my admin config settings, but the 5 kHz tuning steps still start at 7200 kHz. So, I set the 41m band to start at 7300 kHz as recommended, and that solved it for me. Thank you!

  in Tuning Step Sizes on 41m Comment by blurryface May 20
• Correct, when tuned to 7200kHz, it's showing +/- 5kHz for the large tuning buttons: https://forum.kiwisdr.com/uploads/337/PWLRD5GXNB9K.png And it's showing +/- 100kHz for the medium sized tuning buttons: https://forum.kiwisdr.com/uploads/461/RUUCHYE…

  in Tuning Step Sizes on 41m Comment by blurryface May 18
• Thanks, Glenn! Padded envelope on the way!

  in Taming a switching supply? Comment by blurryface January 2023
• Does anyone have any spare N6GN PCBs or Mini Circuits T1-1 transformers they would be willing to part with? I would of course pay you for it. Thanks!

  in Taming a switching supply? Comment by blurryface December 2022
• Never mind! I was able to re-flash from the Debian 10 image, and I'm all good now. Feel free to delete this thread. Thanks!

  in New KiwiSDR Stuck in on v1.2 in Never-Ending Update Comment by blurryface September 2022
• John, My KiwiSDR is still on backorder, but I just want to say a heartfelt thank you for your contributions to this wonderful community and to the radio hobby in general. The KiwiSDR is by far the best online shortwave radio. Your expertise at crea…

  in KiwiSDR production status and availability Comment by blurryface September 2022
• That's what I suspected. 😉 Thanks!

  in Setting up the Debian 10 Image on a BBG without the KiwiSDR Board Comment by blurryface May 2022