RickyTerzis

About

Username: RickyTerzis
Joined: July 2017
Visits: 1
Last Active: October 2017
Roles: Member

Reactions

0Helpful0Awesome

Comments

HI..iC8pof...As per my knowledge the software toggles some of the spare GPIO (70 -76) pins of the P8 connector on the Beagle. When the switch software is used and an antenna is selected the appropriate GPIO pin goes from 0v to 3.3v.This can then be…

in KiwiSDR antenna switch extension [and BeagleBone Black/Green GPIOs] Comment by RickyTerzis July 2017